eobdTOOL

Xtool X100 Pad2 is an useful for car workshop with its professional programming and needed functions. Here, show you the details about XTOOL x100 pad2 new version.

XTOOL X100 pad2 Parameters

After the disassembly of the maintenance personnel, it was found that there was a sign of burning of the individual clutch friction plates, and the splines of the 4-axis (Fig. 3) were indeed polished. This is in accordance with the transmission requirements and standards overhaul repair. After the replacement, the test feel all good (just did not run high speed).

Next to solve the problem of engine oxygen sensor fault code, in the idle and did not find the engine intake, x100 pad2 n information and oxygen sensor information and other adverse circumstances. Simply carry out the relevant inspection and found that the air flow meter grille has been cleaned. It seems that the problem can only be determined by driving.

XTOOL X100 pad2 pro key programmer

In the original xtocl brand x100 pad2 he road after the road test, the results in the high-speed road to test the user has described the fault. Normal acceleration overtaking the engine speed suddenly soared to 5 500 r / min and the speed did not significantly enhance the current time by observing the dynamic data and found that the phenomenon is not the clutch slip caused by the engine idling, but in the normal Acceleration process to maintain the original 4 block, with the throttle opening increased, the transmission down to 3, in the 3 block to maintain a period of time to continue to accelerate the transmission will be reduced from 3 to 2 block. Due to the higher speed (110 ~ 120 km / h) the actual transmission is relatively large.

It is inevitable that x100 pad2 pro rise to 5 000 ~ 6 000 r / min. If the accelerator pedal is not released at this time, the speed of the transmission oil temperature is particularly fast (the torque converter TCC is unlocked), and the fault code of the oxygen sensor appears again. Repeated test, and ultimately determine the transmission of the gearshift function is too easy to achieve, and should not be down when the downshift.

Xtool x100 update :

http://blog.xtooleshop.com/xtool-x100-pad-2-newest-update-and-carlist-all-here/