eobdTOOL

A driving range of only 130km, equipped with 1.5L engine Baojun 510. Customer response: The car can not be started using the keyless entry system.

    Troubleshooting: This car is just bought a new Vpecker Android APP diagnosis car for two days, trying to start while pressing the accelerator pedal, the results start successfully, but after the start of the engine fault light on the instrument is on, so they invited customers into the shop inspection, to shop, first connect the diagnostic instrument Read the fault code, as shown in Figure 1. condor xc mini

    According to the vehicle fault code and fault phenomena, you can rule out theft caused by the failure should focus on checking the throttle and related lines. To view the throttle data flow, the sum of throttle data signal 1 and signal 2 is 5V and no abnormality is found. Repeatedly stepped on the accelerator pedal to view the CGDI Prog MB data, the data is normal. Stop the vehicle, restart, a key to start a success. Repeated many times, the fault did not appear again. Consider this car as a new car, in order to prevent the recurrence of the fault, it is VPECKER E4 recommended that customers will be on the shop to observe the vehicle, the customer does not agree. Learn more about the situation with the customer that the phenomenon of the phenomenon appeared only once in the morning, suspicious of the car when the fault is easy to reproduce. Parking the vehicle in the shop more than two hours later, the SKP100 KEY Programmer  test drive, a key to start a success. Try to replace a new throttle, advise customers to observe the use.