eobdTOOL

Programming process: the following conditions to increase or replace the skp1000  key programming; system failure.

skp1000 key programmer:

http://www.eobdtool.co.uk/wholesale/skp1000-tablet-key-programmer.html

Steps:

● The driver's side door is open and the car key is not in the ignition switch;

● Insert the car key into the ignition switch and pull out the key;

● Turn off and open the driver's door twice in 40 seconds;

● Close the driver's door;

● Insert the car key into the ignition switch;

● Turn on and off the ignition switch once, skp1000 program a new key number in a new car key, and save the old number in the car key or turn on and off the ignition switch twice so that it can be used in a new car key In the program into a new key number, at the same time delete the car keys stored in the old number;

● Remove the car keys;

● The door will now be automatically locked and unlocked once or twice, as to one or two depending on the mode of the vehicle key selection;

 

Complete the following car keys in 20 seconds Operation steps:

● Press the lock and unlock button of the car key at the same time and keep it for 1 ~ 1.5 seconds.

● Press the lock button for at least 1 second in the next 3 seconds, release the button.

● The door will now be automatically by skp1000 programmer locked and unlocked once.

● The door will be automatically locked and unlocked once