eobdTOOL

Maintenance personnel to detect the engine control unit, found fault code 17837 - brake vacuum pump circuit open circuit. Unplug the brake vacuum pump connector, check found T6k / 5 feet from the fuse S51 30 power supply, T6k / 1 feet off the normal iron. Check that the fuse S51 has been blown. One end of the jumper wire is used to contact the power supply side of the brake vacuum pump motor, and the other end touches the positive pole of the battery, and the motor does not rotate. Indicating that the motor has failed.

CGDI Prog BMW MSV80 BMW CGDI Prog Car Key Programmer for BMW

 

Maintenance personnel test, found that the car engine idle running smoothly. Detection of the transmission control unit, found fault code 18265 - engine load signal error. And then detect the engine control unit, the fault code for the 16486 - air flow meter signal weak and 17545 - mixed gas is too thick.

 

CGDI MSV80 Key Programmer highlights:

 

Read the idle measurement of CGDI Prog groups of 4 areas of data, air flow of 0.0 g / s, abnormal. Check that the air flow meter harness is good and the power supply is normal. Hand over the air flow meter to the turbocharger hose, the hose was sucked at the same time the engine flameout, indicating that the air intake system without leakage point, the problem should be on the air flow meter.

 

Troubleshooting: After CGDI BMW MSV80 replacing the air flow meter, the air flow data becomes 5.3 g / s. But for the forward gear when the impact is still, and the engine running for some time, the air flow down to 3.2 g / s, the arrival of the impact disappeared. This CGDI car key programmer means that the transmission control unit has started to normally use the data sent by the engine control unit. So, clear the fault code delivery.

Free update software:
001: CAS
002: CAS4  CAS4+
003: Engine EME


CGDI MSV80 Key Programmer Description:

CGDI Car Key programmer for BMW CAS1/CAS2/CAS3 CGDI Key Prog Support CAS4 /CAS 4+ Key Matching and All key lost

CGDI Key Programmer BMW CGDI is high technical products which mainly doing Auto diagnose, programming, security maintenance.

CGDI Prog BMW MSV80 Key Programmer For BMW Features: software response fast, short time programming, its has new breakthrough in operation safety and technical support.
BMW CGDI MSV80 Auto Key Programmer CGDI MSV80 BMW Car Key Programmer with OBD Functions